|
Identical Footings
|
Set this option if both of the isolated footings have the same dimensions. |
|
Length
|
Type the length (direction parallel to the X axis) to be used for the footing design, along with unit. |
|
Width
|
Type the width (direction parallel to the Z axis) to be used for the footing design, along with unit. |
|
Height
|
Type the thickness (direction parallel to the Y axis) to be used for the footing design, along with unit. |
|
Maximum Length
|
(Calculate only) Type the maximum length (direction parallel to the X axis) to be used for the footing design, along with unit. |
|
Maximum Width
|
(Calculate only) Type the maximum width (direction parallel to the Z axis) to be used for the footing design, along with unit. |
|
Minimum Height
|
Type the thickness (direction parallel to the Z axis; or out-of plan dimension) to be used for the footing, along with unit. For a Calculate Dimension design, this is used as the minimum dimension to check. |
|
Offset X / Z
|
Type the offset dimension parallel to the X and Z axis between the center of the footing and the pedestal. |
|
Set as Default
|
Select Yes to have the current parameter values set as the defaults for new Combined Footing: Footing Geometry parameters.
|
